Specifications: Remote Control, Quantity: 1, Color: White1. Power Supply: AC110-220V, 50Hz/60Hz, 350W2. Power on, heating and fan running. Default operation is 12 hours without pressing any buttons.3. Press the time button to switch to the timer setting. [Old: Press the + or - button to set the timer; New: Press the time button to set the timer.] Then press the time button to switch back to the temperature setting.4. The initial temperature displayed is 20C. Use the up and down buttons to set the temperature from 15C to 32C. The timer setting is 1 to 12 hours.5. Press the fan button to switch between high (HH) and low (LL) fan speed settings.6. Heating is turned off. The fan continues to run for 60 seconds before stopping, and the screen turns off. Displays "OF".7. When the timer expires (if not set, the default is 12 hours), the heating will be turned off, and the fan will continue to operate for 60 seconds before stopping. The screen will display "OF".8. After the cycle is complete, press any key to restart the cycle (if the timer is not set, the default is 12 hours).9. If the "Natural Wind" function is enabled, press and hold the "+" or "-" key for three seconds to activate it. The display will display "CC". Continue pressing the "+" or "-" key for three seconds to deactivate it. The "Natural Wind" setting will be displayed.Single color box specifications: 12.5*11*19cmProduct dimensions: 19*11.5*12.5cmPackage contents: 1*White EU standard remote control model.Note: 1. Due to different monitors and lighting effects, the actual color may vary slightly from the image.2. Due to manual measurement, please allow 1-3 cm deviation.