12V/24V LCD Solar Charge Controller 30A Automatic Identification Multifunction with LCD Display E2U611

Feature 1、Can automatically manage the work of solar panels and batteries in the solar system. Easy to set up and operate. In order to protect the service life of the battery, once the battery voltage drops below 8V, the solar charge controller will automatically shut down (LCD cannot be used at the same time). This is a very smart solar panel unit! 2、Multiple electrical protection functions, if the solar controller is set to 12V, when the battery voltage reaches 14.4V or 14.5V, the solar controller will stop charging and play a protective role. If it does not enter the floating state, please don't worry, the solar charge controller has a voltage limit value, if the battery voltage reaches 14.4V or 14.5V, it will not charge. 3、Easy to install and operate, can clearly indicate status and data, and can easily switch modes and parameter configuration. Install the solar charge controller as close to the battery as possible to avoid voltage drop due to excessively long wires and affect normal voltage judgment. 4、It has good heat dissipation, double reverse current protection and low heat generation. All electronic components generate heat during operation, so it is best to shield them to better dissipate heat, avoid direct sunlight or put them in humid places. 5、Equipped with LCD display screen, for clear display. With compact shape, take up no space, and also easy to carry with.Item Type: Solar Charge ControllerMaterial: PlasticVoltage: 12V/24V .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }Package List1 x Solar Charge Controller1 x ManualNote If the solar charge controller is set to 12V, when the battery voltage reaches 14.4V or 14.5V, the solar charge controller will stop charging and play a protective role. If it does not enter the floating state, please don't worry, the solar charge controller has a voltage limit value, will be not charge if the battery voltage reaches to 14.4V or 14.5V.