16A Temperature Controller For Sht2000 Multi-purpose Digital Thermostat With Sensor Probe Celsius Display For Heating Cooling

Durable and practical: SHT2000 is made of high-quality materials, which is durable and durable.<br> Intelligent digital display: The SHT2000 humidity and temperature controller has an intelligent digital display that can provide accurate and clear temperature and humidity readings.<br> Relay output: Equipped with relay output, SHT2000 can easily control connected devices with a maximum power of 10 A.<br> Easy to install and calibrate: With easy-to-use buttons and intuitive interface, setting the required temperature and humidity values is both fast and simple.<br> Packaging content: 1 thermostat<br> Features:<br> Product Name: Temperature and Humidity Controller.<br> Product model: SHT2000.<br> Power frequency: 50/60 Hz.<br> Temperature range: -20~60 ° C.<br> Humidity range: 0%~RH.<br> Temperature measurement accuracy: 0.3.<br> Humidity measurement accuracy: 3%.<br> Output control: Relay output.<br> Output power: maximum 10 A.<br> Setting method: Initial value.<br> Setting method: Start value>Stop value (the program automatically determines the operating mode as cooling/dehumidifier mode).<br> Set heating/cooling mode:<br> Setting mode (start temperature): Press and hold the button to start flashing temperature. Use the button to set the starting temperature value.<br> Setting (temperature stop): Press and hold the button to stop the temperature flashing. Use to set the stop temperature value.<br> Heating usage: Control the water heater, stop heating at 65 ° C, drop the temperature to 50 ° C, and start heating again<br> Step 1: Heating mode, start temperature.<br> Step 2: Press and hold the button to start flashing temperature. Use to set the startup temperature to 50 ° C.<br> Step 3: Press and hold the button to stop the temperature flashing. Use the button to set the stop temperature to 65 ° C, and the setting is complete.<br> Refrigeration use case: For farm use, the fan stops ventilation at 26 degrees Celsius, rises to 30 degrees Celsius, and starts ventilation again.<br> Step 1: Cooling mode, start temperature>stop temperature<br> Step 2: Press and hold the button to start flashing temperature. Use to set the startup temperature to 30 ° C.<br> Step 3: Press and hold the button to stop the temperature flashing. Use to set the stop temperature to 26 ° C. Adjustment completed.<br> Humidification/dehumidification mode settings:<br> Set (start humidity): Press and hold the humidity value key to activate the flashing humidity value. Set the humidity value by pressing the button. Set [Stop Humidity]: Press and hold the humidity value key to stop the humidity value, and set the humidity to stop at<br> Example of humidification: Supermarket fresh humidification, control the humidifier to start humidification at 50% relative humidity, and stop humidification at 80% relative humidity.<br> Installation steps:<br> Step 1: Press and hold the " button for 3 seconds to start flashing the humidity value, and set the initial humidity value to 50% RH.<br> Step 2: Press and hold the button for 3 seconds to stop flashing the humidity value. Set the value to 80% relative humidity. Once the setting is completed, the button will not work for 5 seconds and automatically return to the normal display state.<br> Dehumidification example: Exhaust dehumidification system, humidity 70% relative humidity starts dehumidification, humidity 40% relative humidity stops dehumidification<br> Installation steps:<br> Step 1: Press and hold the " button for 3 seconds to start flashing the humidity value, and set the initial humidity value to 40% RH.<br> Step 2: Press and hold the button for 3 seconds to stop the humidity value flashing, set the value to 70% relative humidity, and after the setting is completed, the button will not work for 5 seconds and automatically return to the normal display state.<br> Packaging content:<br> 1 thermostat.