1PCS RC Simulation Boat Dynamic Radars Shaking Rod L60mm/80mm Photosensitive Resin Radar 1.5V-1.8V Motor for Ship Model Parts Notice:- Different motor batches, the wire color will be different, sometimes the motor wire is red + black wire, sometimes it is red + blue wire, this does not affect any performance, red wire is positive, black or blue wire is negative. Description: - Item name: Simulation dynamic radar model - Proceing technology: Light curing printing - Material: Photosensitive resin - Base reservation: 6mm diameter geared motor can be installed - Motor Supply voltage: 1.5V-1.8V Specification: Type A 43.2x80mm - Base: height 43.2mm - Shaking rod length 80mm - Weight: 5g (with motor 6.9g) Type B 39.4x60mm - Base: height 39.4mm - Shaking rod length 60mm - Weight: 5.2g (with motor 7g) Type C 25.3x60mm - Base: height 25.3mm - Shaking rod length 60mm - Weight: 4g (with motor 5.8g) Buck converter: - Size: 20 x 30mm - Input voltage: 5V-15V - Output voltage: 1.25V 1.5V 1.8V 2.5V 3.3V 5V, default 1.25V - Output current: 3A - Weight: About 4.3g/pcs Note: - The radar need to be aembled by yourself. - There is no need to dispense glue when installing shaking rod. if needed, please control the amount of glue to prevent the motor output shaft from being soaked with glue and unable to rotate. - Please allow slightly measuring deviation due to manual measurement. - Due to unavoidable factors such as monitor, shooting angle, light source, etc., the color in the picture may have a very slight color difference with the goods you receive. Everything is subject to the goods you receive. Package included: 1pcs x radar model If you need motor to DIY, please click below picture