Soldering iron used compact mechanical design work easier. Tin wire scaffold can be disassembled, easy to use. Rated with a diameter of 0.8 ~ 2.3mm tin line. It will be a perfect helper for you. Features: Soldering iron used compact mechanical design work easier. Tin wire scaffold can be disassembled, easy to use. Can be operated by one handed, not easy to make mistakes Simple, easy to complete the welding operation. Rated with a diameter of 0.8 ~ 2.3mm tin line. Lightweight, hand held comfort. How to Use: 1. Soldering Iron used for the first time, be warm a few minutes, a smoke is a normal phenomenon, will disappear in a few seconds. 2. Will be rated into the tin from the tin line into the mouth, and then pull the trigger direction of the arrow until the tin le ad solder wire to the nozzle only to be working. 3. Stop the use or replacement of tin wire to be out, as long as the direction of the board up drive, and remove the tin wire. 4. Hea ter replacement, the first protective cover removed, open the hea ter connection, and then remove the iron Tsui to the core of the heat can be replaced. Specifications: Main material: alloy tip, ABS Item weight: 242g / 8.53oz Package weight: 303g / 10.69oz Item size: 18 * 14 * 3cm / 7.09 * 5.51 * 1.18in Package size: 20 * 15 * 3cm / 7.87 * 5.91 * 1.18in Notes: 1. At work, iron and iron pipe temperatures up to 400 degrees Celsius, please do not touch. 2. Stop using the hand gun, set it on its bracket. 3. Work is completed, turn off the switch so to save the place after cooling. 4. There are different plug standard to choose, please choose the right one that suitable for your country. Packing list: 1 * Soldering Iron