Adjustable audio crossover for multiple speakers, tweeters, and woofers; two-way filter for home amplifiers Adjustable audio crossover for multiple speakers, tweeters, and woofers; two-way filter for home amplifiers WEAH-2002 120W Subwoofer, Crossover, Two-Way Car Audio, Subwoofer, Car Crossover Filter: Exquisite workmanship, high-quality materials, and overcurrent protection. The high-frequency section uses three 100V 1.5μF non-inductive capacitors from well-known brands in parallel, which is more difficult to achieve than using hollow inductors. To ensure rapid sound transmission from the source, the treble can be boosted by 3dB by turning on the power switch if necessary. The low-frequency response is achieved through an inductor and an imported 220uF capacitor, resulting in a clear and full power output. Features: Overcurrent protection. The high-volume section uses parallel parallel 100V 1.5uf non-inductive capacitors from a renowned German brand, along with a non-polarized high-power capacitor; the low-frequency response is achieved through inductor conversion, resulting in a clear and full power output. Equipped with two 16mm voltage divider capacitors. Simply connect the corresponding wires and tighten the screws. Specifications: Model: WEAH-2002 Material: ABS Color: As shown in the picture Power: 120W Maximum Power: 220W Voltage: 12V Frequency Response: 55Hz-20kHz Impedance: 2/4/6Ω Dimensions: 120 * 65 * 33 mm Weight: 156 g Usage: First, connect the audio cable to the input of the crossover. Connect the bass output of the crossover to the tweeter. Note: Due to different production batches, the color of the internal capacitors may vary (black or blue), but the quality is the same. Due to differences in monitors and lighting conditions, the actual color of the product may differ slightly from the color shown in the picture. Thank you! Please allow for a 1-2 cm measurement error due to manual measurement. 1 X Frequency Divider