Condition: 100% Brand New_x000D_Item Type: DC Motor Driver_x000D_Material: Metal_x000D_Color: Black_x000D_H-Bridge Motor Driver_x000D_ Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads_x000D_? Wide 6.5-V to 45-V Operating Voltage_x000D_? 565-m Typical RDS(on) (HS + LS)_x000D_? 3.6-A Peak Current Drive_x000D_? PWM Control Interface_x000D_? Current Regulation Without a Sense Resistor_x000D_? Low-Power Sleep Mode_x000D_? Small Package and Footprint:_x000D_ 8-Pin HSOP With PowerPAD?_x000D_ 4.9 6 mm / 0.19 x 0.24in_x000D_? Integrated Protection Features:_x000D_ VM Undervoltage Lockout (UVLO)_x000D_ Overcurrent Protection (OCP)_x000D_ Thermal Shutdown (TSD)_x000D_ Automatic Fault Recovery_x000D_Applications:_x000D_? Printers_x000D_? Appliances_x000D_? Industrial Equipment_x000D_? Other Mechatronic Applications 1The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines. 2Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current. 3The inputs can be pulsewidth modulated (PWM) to control motor speed, using a choice of current-decay modes. 4The DRV8871 device has advanced currentregulation circuitry that does not use an analog voltage reference or external sense resistor. 5This novel solution uses a standard low-cost, low-power resistor to set the current threshold. 6The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage, especially for motor startup and stall conditions. 7The device is fully protected from faults and short circuits, including undervoltage (UVLO), overcurrent (OCP), and overtemperature (TSD). 8When the fault condition is removed, the device automatically resumes normal operation.1 xDC Motor Driver