A dead battery on the road is often quickly resolved if you have jumper cables. It's therefore useful to include this jump-start aid in your trunk! With the cables, you can restart a stalled car or van, whether you have a car problem yourself or you are helping someone else in case of a breakdown. Copper-coated aluminum wire These jumper cables are made from aluminum with a copper coating and have a cross-section of 25 mm2. The distinctively colored handles (red and black) and insulated terminals reduce the risk of short circuits. The use is simple and clearly explained in the manual with explanatory drawings. So it doesn't matter if you are experienced or using the jumper cables for the first time. Length 3.5 meters The jumper cables measure 3.5 meters in length. This gives you a good margin to cover a reasonable distance between the broken-down vehicle and the vehicle providing the power. The jumper cables are flexible, allowing you to coil them nicely and store them easily. Thoroughly tested Of course, these jumper cables have successfully passed various tests. They are compliant with the DIN 72553 standard and have the following quality labels: TÜV Rheinland, GS, and CE. This 350 amp starter is approved for gasoline engines with a capacity of up to 5.5 liters and diesel engines with a capacity of up to 3/4 liters. Specifications of Dunlop jumper cables: Cable diameter: 25 mm2 Length: 2x 3.5 meters Nominal voltage: 12/24 VDC Nominal current: 350 A Conductor material: Aluminum