Description 1Equipped with LCD, with backlight function, it can display the measurement results directly. 2Flexible coil clamp meter, stable performance, supports AC high current measurement. 3High resolution, real reduction, accuracy up to 10mA, suitable for most users. 4No hysteresis effect, strong antiinterference ability, wide measurement range and strong reliability. 5Beautiful appearance, soft and flexible, it is very suitable for narrow environment and places with dense cable arrangement. 6With peak capture hold function, data hold function, data storage function, over range overflow function. 7The tested conductor shall be at the center of the flexible coil as far as possible, not close to the opening and closing, and the test error at the opening shall be doubled or more.Condition: 100% Brand NewItem Type: Coil Clamp MeterMaterial: ABSPower: Zinc Manganese Dioxide Dry Battery 6F22 9V (Battery Not Included)Test Method: Flexible CT: The output signal is the current-to-time differential. By integrating the output voltage signal, the input current can be truly restored.Coil Inner Diameter: Approx. 200mm / 7.9inRange: AC 0.00A-9999AResolution: AC 10mAAccuracy: Soil 2% 3dgt (Wire is at the center of the flexible coil, 23 C 2 C)Coil Length: Approx. 628mm / 24.7inCoil Thickness: Diameter: Approx. 7.5mm / 0.3in (Very suitable for narrow environments and densely packed places, etc.)Measured Current Frequency: 50HZ/60HZ (Automatic identification)Instrument Size: Approx.190x370x40mm / 7.5x14.6x1.6inLCD Size: Approx. 35x21.5mm / 1.4x0.8in; Display Field: Approx. 32x15mm / 1.3x0.6inBacklight: Backlit for easy use in dim fieldsElectric Field Interference: No hysteresis effect, strong anti-interference abilityPosition Error: The wire to be tested should be in the center of the flexible coil as much as possible. Do not approach the opening and closing. The test error at the opening is approximately doubled or more.Sampling Rate: 2 times / secData Storage: 99 groups, flashing display FULL signalindicates that the storage is full.Peak Hold: Peak capture hold function, press and hold POWER to not show the peak signalduring testData Retention: data retention function: DHsignaldisplayLine Voltage: AC600V line testOverflow Display: Overrange overflow function: OLsignaldisplayBattery Voltage: When the battery voltage drops to about 7.2V, the battery voltage is low, indicating that the battery is replaced.Rated Current: About 8mAWorking Temperature and Humidity: -10 C - 40 C; below 80% rhStorage Temperature and Humidity: -10 C - 60 C; below 70% rh Insulation Resistance: 100M or more, 1000V 1 x Coil Clamp Meter (Battery Not Included)1 x Cloth Bag1 x Instruction Manual