Feature: 1. Equipped with LCD, with backlight function, it can display the measurement results directly. 2. Flexible coil clamp meter, stable performance, supports AC high current measurement. 3. High resolution, real reduction, accuracy up to 10mA, suitable for most users. 4. No hysteresis effect, strong anti‑interference ability, wide measurement range and strong reliability. 5. Beautiful appearance, soft and flexible, it is very suitable for narrow environment and places with dense cable arrangement. 6. With peak capture hold function, data hold function, data storage function, over range overflow function. 7. The tested conductor shall be at the center of the flexible coil as far as possible, not close to the opening and closing, and the test error at the opening shall be doubled or more. Specification: Condition: 100% Brand New Item Type: Coil Clamp Meter Material: ABS Power: Zinc Manganese Dioxide Dry Battery 6F22 9V (Battery Not Included) Test Method: Flexible CT: The output signal is the current-to-time differential. By integrating the output voltage signal, the input current can be truly restored. Coil Inner Diameter: Approx. 200mm / 7.9in Range: AC 0.00A-9999A Resolution: AC 10mA Accuracy: Soil 2% ± 3dgt (Wire is at the center of the flexible coil, 23 ° C ± 2 ° C) Coil Length: Approx. 628mm / 24.7in Coil Thickness: Diameter: Approx. 7.5mm / 0.3in (Very suitable for narrow environments and densely packed places, etc.) Measured Current Frequency: 50HZ/60HZ (Automatic identification) Instrument Size: Approx.190x370x40mm / 7.5x14.6x1.6in LCD Size: Approx. 35x21.5mm / 1.4x0.8in; Display Field: Approx. 32x15mm / 1.3x0.6in Backlight: Backlit for easy use in dim fields Electric Field Interference: No hysteresis effect, strong anti-interference ability Position Error: The wire to be tested should be in the center of the flexible coil as much as possible. Do not approach the opening and closing. The test error at the opening is approximately doubled or more. Sampling Rate: 2 times / sec Data Storage: 99 groups, flashing display "FULL" signal indicates that the storage is full. Peak Hold: Peak capture hold function, press and hold POWER to not show the peak signal during test Data Retention: data retention function: "DH" signal display Line Voltage: AC600V line test Overflow Display: Overrange overflow function: "OL" signal display Battery Voltage: When the battery voltage drops to about 7.2V, the battery voltage is low, indicating that the battery is replaced. Rated Current: About 8mA Working Temperature and Humidity: -10 ° C - 40 ° C; below 80% rh Storage Temperature and Humidity: -10 ° C - 60 ° C; below 70% rh Insulation Resistance: 100MΩ or more, 1000V . Package List: 1 x Coil Clamp Meter (Battery Not Included)1 x Cloth Bag1 x Instruction Manual