Flocking Kit Static Grass Applicator Abs Flocking Machine With Antislip Handle For Diy Table

1. Load the battery use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step 2. Put in the grass . It is suggested that the length of the grass is more than 5mm, which is more effective.Then tighten the lid. 3. In the model and on the ground table, white latex is drawn and applied evenly, to start sprinkling grass 4. Press the surface of the platform with the negative electrode electrical connector, as as possible, and then use the grass planter to start spraying the grass 2-3cm from the platform. 5. After the grass is finished, pour out the extra grass or use a model vacuum cleaner to suck it up.Trim the haystack with small scissors and a toothpick until it grows evenly. colour: black Material: metal Package Contents: 1 x flocking machine (without 2 x 1.5V batteries) 1 x small diameter net cover 1 x -diameter net cover 1 bag x grass 1 x brush 1 x planting template tool Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.