For Kawasaki ZX9R 1998 1999 2000 2001 2002 2003 ZX 9R Ninja ZX-9R Motorcycle Gear Indicator Digital 1-6 Level Gear Meter

€139.00
+ €14.99 Shipping

For Kawasaki ZX9R 1998 1999 2000 2001 2002 2003 ZX 9R Ninja ZX-9R Motorcycle Gear Indicator Digital 1-6 Level Gear Meter

  • Brand: Unbranded

For Kawasaki ZX9R 1998 1999 2000 2001 2002 2003 ZX 9R Ninja ZX-9R Motorcycle Gear Indicator Digital 1-6 Level Gear Meter

  • Brand: Unbranded
RRP: €259.00
Price: €139.00
You save: €120.00 (46%)
Sold by:
€139.00
+ €14.99 Shipping

In stock

We accept the following payment methods

Description

_x000D_ Features: Condition:100% New Color:Black Light Color: Red/Blue/Green 1-6 Gear display _x000D_ Fitment: For Kawasaki Ninja ZX9R 1998-2003 _x000D_ Instructions Guide: Disclaimer: Do not attempt to install the product if you dont have basic mechanical skills. If in doubt, please consult with your dealer. 1. Remove the seat and raise the fuel tank. 2. Locate the Speed Sensor coupler. The Speed Sensor is mounted on the front sprocket cover, and the 3-pole black speed sensor coupler is situated 20-40 cm (8-16) away from sensor. The connector is accessible under the fuel tank (W650: behind left side cover). Confirmation: Separate the Speed Sensor coupler (you might need to use a small flathead screwdriver to get the coupler apart). Rotate the wheels while ignition is on. The speedometer should indicate 0. If so, turn the ignition off and proceed to the next step. Otherwise, if the speedometer registers a speed other than 0, you have not disconnected the correct coupler and need to look again. 3. After separating the Speed Sensor coupler, plug in both the male and female 3-pole GFYSHIP harness connectors. Make sure the connectors are fully seated. 4. Find an RPM signal wire: ZX-6R, ZZR600: Tachometer wire at the Dashboard connector or at the ECU connector Light Blue (Solid Light Blue wire) ZX-9R: Pickup coil (crankshaft sensor) connector under the fuel tank 3-pole, White triangular connector Yellow (Solid Yellow wire) W650: Pickup coil (crankshaft sensor) behind left side cover 4-pole connector Black/White (Solid Black wire with thin White stripe) 5. Peel off the black sleeve (tape), leaving about 3 cm (1.2) of this wire exposed. 6. Connect the GFYSHIP Black/Green wire to this wire, using the Red wire tap connector supplied. _x000D_ Setup: You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear. - Raise the rear wheel off the ground by using a stand, and start the engine in Neutral. (If you do not have a stand, you may setup the unit while riding. Find a long, straight road with light traffic.) - The display will blink 1. Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear. - When the display shows 2, select second gear. Repeat this process until all gears are thought (5 or 6). The unit is programmed and should indicate the gears correctly. Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional. _x000D_ Package Include: 1 x Gear Indicator _x000D_ _x000D_ _x000D_ _x000D_
  • Fruugo ID: 272160330-603732432
  • EAN: 6012195431013

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark
Safety Warnings: WARNING! TO AVOID DANGER OF SUFFOCATION,KEEP AWAY FROM BABIES ANDCHILDREN. DO NOT USE IN CRIBS/BEDSOR PLAY PENS.THIS BAG IS NOT ATOY.
Ingredients: Octinoxate 5.3%
Manufacturer Part Number: XWH717750
Model Number: XWH664604
Serial Number: XWH363484
Batch Number: XWH119039

Delivery & Returns

Dispatched within 3 days

  • EXPRESS: €14.99 - Delivery between Thu 09 October 2025–Wed 15 October 2025

Shipping from China.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • Wu Han Liang Peng Shang Mao You Xian Gong Si
  • Shenzhen Heduobang Technology Co., Ltd
  • Room 525, Building 20, Longbi Industrial Zone, Bantian Street, Longgang District, Shenzhen
  • Shenzhen
  • China
  • 518000
  • sandyopelan@163.com
  • 15820570364
  • https://www.fruugoschweiz.com/wu-han-liang-peng-shang-mao-you-xian-gong-si/m-19901

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • Axitera GmbH
  • Axitera GmbH
  • Kreuznacher Str. 30
  • Frankfurt am Main
  • Germany
  • 60486
  • successservice3@gmail.com
  • (+49) 6934873848