Hot End Mounting Block 3d Printer Accessories Compatible Vyper Compatible Max-dt

Applicable models: Vyper B/Vyper C /Vyper D series models FOR Vyper E hot end mounting block Applicable models: Vyper E/ series models For the Vyper model, the hot-end mounting block and the induction strain gauge may experience aging failure, or the product replacement product that needs to be replaced in case of failure. The main functions include fixed hot end, automatic leveling (need to cooperate with the model motherboard) Precautions for use: 1) Do not turn out the wire at the sealant, otherwise it will lead to the failure of the sensing function. 2) When installing the mounting block, the screws should not be tightened too tightly, just tighten properly without shaking, otherwise it will cause additional stress on the mounting block and affect the induction plate, thereby affecting the performance of the leveling switch. 3) After the installation is complete, first lift the Z-axis, use tweezers or other tools to touch the nozzle lightly continuously and observe whether the indicator light of the integrated motherboard connected to the sensor will as the nozzle is touched, and the sensor It is normal if the indicator light is normally off when the installation block is not triggered. Colour:black Material:metal Package Contents: 1 x hot end mounting block Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.