Product parameters:Name: One-handed Gaming keyboard + converterProduct model: V500Product interface: USB 2.0Press the number of keys: 35 keysKey life: 20 million timesProduct line length: 1.55m（Braided wire）Flash ROM: 32 bytesEEPROM: Built-in 2K bytesOperating voltage : VDD = 3.3V - 5.5VWorking current: 100mAAmbient temperature: - 40°C - + 85°CProgramming temperature: 0°C - + 85°CLighting mode: RGB lighting, multiple lighting modes can be switchedProduct net weight: 357gProduct size: 25.3*18*3.7cmPackage Weight:431gPackage Size:26.1*19*4cm    Supported platforms: PS3, PS4, XBOX 360, XBOX one, SWITCH.    Package Included:1*gaming keyboard(35 keys)1* English User manual    The keyboard backlight function is controlled as follows:Fn+F3= 8 kinds of backlight mode switching (red light → blue light → green light→ purple light → sky blue light → yellow light → white light → rainbow light)Fn+F4= Wave/Colorful Horse Race: Colorful color gradient running water.The default wave mode. Press again to enter the colorful cycling horse mode.Fn+F5= Backlight off/on, cycle switch.FN+5 = Adjust the streamer speed to become fasterFN+6 = Adjust the streamer speed to slow downTwo USB interface functions:Connect the USB cable to the game console, press the logo, and connect the original handle with the mouse Connect to the corresponding USB interface:1. The product converts the keyboard and mouse functions to the corresponding game platform for game operation2. The product must be connected to the original wired controller for wired guidance (except for the SWITCH host) in order to normally convert the keyboard and mouse to the corresponding game platform3. Supported platforms: PS3, PS4, XBOX 360, XBOX one, SWITCH4. The default two sets of key values, the mouse corresponds to the game platform function5. The direction of the mouse axis can be switched by pressingESC+CAPSLOCK+A/S/D/F/G6. The mouse movement speed can be adjusted, and the speed of the axis can beadjusted as a whole through the ESC+R buttons.7. Support USB upgrade8. Product working voltage: DC 5VLED corresponding mode:■ When the one-handed keyboard is not connected to peripherals,the right indicator light ② will be red(Check the digital number against the picture in the manual）■ When the original handle and mouse peripherals are inserted,the left indicator light ① shows green light(Check the digital number against the picture in the manual）1.Set keyboard and mouse functions2.Connect the keyboard to the game console, and insert the corresponding original wired controller into the designated interface of the device* Press ESC+SPACE on the keyboard at the same time to enter the mode of setting the keyboard and mouse button functions by yourself (the setting indicator lights up at this time).* Press and hold the function button of the original handle* Click the button on the keyboard or mouse to be set* Release the original wired handle button* At this time, the function of the button held down by the original handle is set to the pressedkeyboard or mouse button.