Laing / Goulds E10 circulation pump, 73999, E10-NSTNDNN2W (65W, 24h, 3/4", MPT threaded) for spas and bathtubs
€244.77
+ €29.52 Shipping
+ €29.52 Shipping
Laing / Goulds E10 circulation pump, 73999, E10-NSTNDNN2W (65W, 24h, 3/4", MPT threaded) for spas and bathtubs
- Brand: Laing/Goulds
Laing / Goulds E10 circulation pump, 73999, E10-NSTNDNN2W (65W, 24h, 3/4", MPT threaded) for spas and bathtubs
- Brand: Laing/Goulds
| Price: |
Sold by:
Telealk
Description
You can find this same pump under the part numbers below and brands: Laing/Goulds/ITT (but it's the same pump)Laing 73999, 909-NT-26 6918, 909-NT-18 6917, 10-0125-K (Hydro-Quip) , 6510 , 6513 , 6917 , 6918 , 6921 , 733886691702 , 733886691801 , 733886739992 , 73999 , 906930534 , 9338-21 , 9339-10 , 9339-11 , 9339-13 , 9339-17 , E10-NSTN2W-20 , LHB07100140 , SM909NT-240, LHB07100075, 34-158-1456 (Horizon) _ Technical informations:Connection: 3/4" x2 (threaded MPT)Weight: 1,7 kgDimensions: 120mm×117mm×151mm Speed: fix 24h, 1.800 - 3.100 rmpPower: max 65W House: P44Protection: IP55Max Pressure: 2 barMax flow: 1.500l/h, 3,9m, 16,25WMax head: 5,7m Current: 240V (50/60Hz)Rotation: 1.800-3.100 rmpElectrical connector: Non Cable: 4', 1mNoise: less than 50 db
- Brand: Laing/Goulds
- Category: Motor Vehicle Engine Parts
-
Speed: fix
-
Wattage: 65
-
Power Supply: 230V no connector
- Fruugo ID: 268801648-594786138
- EAN: 733886502091
Product Safety Information
Please see the product safety information specific to this product outlined below
The following information is provided by the independent third-party retailer selling this product.
Safety Warnings:
Pump should only be used with liquids compatible with pump component materials. Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in flammable and/or explosive atmospheres
For your protection always wear proper clothing, eye protection, etc. in case of any malfunction. Failure to comply with this warning may result in personal injury and/or property damage.
Ensure that the power source conforms to the requirements of your equipment.
Disconnect power before servicing. If the power disconnect is out of sight, lock in the open position and tag it to prevent unexpected application of power. Failure to do so may result in a fatal electric shock!
Release all pressure within the system before servicing any component. Drain liquids from the system before servicing.
Make workshop childproof with padlocks, master switches and by removing starter keys.
When wiring an electrically driven pump follow all electrical and safety codes, as well as the most recent European or United States National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA). The pump should be connected by a qualified electrician.
Protect electrical cord from sharp objects, hot surfaces, oil, and chemicals. Avoid kinking the cord. Replace or repair damaged or worn cords immediately.
Do not handle a pump or pump motor with wet hands or when standing on a wet or damp surface or in water.
Please see the compliance information specific to this product outlined below.
The following information is provided by the independent third-party retailer selling this product.
Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.
- Xylem
- Xylem Service Hungary Kft
- Külső-Kátai út 41
- Cegléd
- Hungary
- 2700
- xylem@xyleminc.com
- 3653510502
- https://www.xylem.com/