Laing Goulds E3 circulation pump E3-DCHFDNNW (27W, 24h, 1/2", smooth barb) for spas and bathtubs
€258.30
+ €29.52 Shipping
+ €29.52 Shipping
Laing Goulds E3 circulation pump E3-DCHFDNNW (27W, 24h, 1/2", smooth barb) for spas and bathtubs
- Brand: Laing/Goulds
Laing Goulds E3 circulation pump E3-DCHFDNNW (27W, 24h, 1/2", smooth barb) for spas and bathtubs
- Brand: Laing/Goulds
| Price: |
Description
You can find this same pump under the part numbers below and brands: Laing / Goulds / ITT /thermotech (but it's the same pump)10-0126 (HydroQuip), E3-NCHNDNN3W-10 (Laing), 608C5028 (Laing), LMB08100069 (Laing)If you find any of the above part numbers on your pump you can replace it by this pump.You can orde this pump with USA plug (Nema plug) or AMP plug or without plug _Technical informations:Connection: 1/2" x2 (smooth barb)Weight: 0,65 kgDimensions: 109mm x 88mm x 126mmSpeed: fix 24h, Power: max 27W House: metal fixation plate (can be dismounted)Protection: IP44Max Pressure: 2 barMax flow: 1255l/h (4m), operation: 700l/h (2,26m, 21,3W)Max head: 4mCurrent: 100 - 230V (50/60Hz)Rotation: 4.800 rmpElectrical connector: USA plug (Nema plug) or AMPCable: 0,6 mNoise: less than 50 db
- Brand: Laing/Goulds
- Category: Motor Vehicle Engine Parts
-
Speed: fix
-
Wattage: 27
-
Power Supply: 230V AMP or Nema connector
- Fruugo ID: 268801656-594786159
-
Sold by: Telealk
Product Safety Information
Please see the product safety information specific to this product outlined below
The following information is provided by the independent third-party retailer selling this product.
Safety Warnings:
Pump should only be used with liquids compatible with pump component materials. Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in flammable and/or explosive atmospheres
For your protection always wear proper clothing, eye protection, etc. in case of any malfunction. Failure to comply with this warning may result in personal injury and/or property damage.
Ensure that the power source conforms to the requirements of your equipment.
Disconnect power before servicing. If the power disconnect is out of sight, lock in the open position and tag it to prevent unexpected application of power. Failure to do so may result in a fatal electric shock!
Release all pressure within the system before servicing any component. Drain liquids from the system before servicing.
Make workshop childproof with padlocks, master switches and by removing starter keys.
When wiring an electrically driven pump follow all electrical and safety codes, as well as the most recent European or United States National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA). The pump should be connected by a qualified electrician.
Protect electrical cord from sharp objects, hot surfaces, oil, and chemicals. Avoid kinking the cord. Replace or repair damaged or worn cords immediately.
Do not handle a pump or pump motor with wet hands or when standing on a wet or damp surface or in water.