Item Type: Dual?Relay Control Board Material: ABS Plastic User Capacity: 2100 Zone 1: 2000 Zone 2: 100 Working Voltage: 9-24V DC Idle Current: <100 mA Adjustable Relay Output Time: 1-99 seconds (default 5 seconds) Locked Output Load: 5A maximum For Wiegand Interface: Input: For Wiegand 26-37 Output: For Wiegand 26-37 bits (used for user data transmission) Surroundings: Working Temperature: -40℃-60℃ (-40-140℉) Working Humidity: 0-90%RH Product Size: Approx. 100x86x26mm/3.9x3.4x1in Power Supply Mode of The Remote Control: Built-in a 50mAh CR2025 button battery (the built-in battery of the remote control is shipped) How to Use: 1. The WiFi dual-door control panel is connected to the smart lock or access control machine. 2. The WiFi dual-door control panel is connected to the same WiFi as the mobile phone. 3. The WiFi dual-door control panel can be controlled with a mobile phone. 1、Built-in WIFI module, through the APP installed in the mobile device, users can open the door wherever they can access the Internet. 2、It can be used as a traditional independent dual relay controller, used with any for Wiegand 26-37 bit output reader to control 2 doors. 3、It can be connected via WiFi and supports mobile APP remote control. Open the door remotely in the home network or remotely open it anywhere, you can use your smart phone or tablet to access the Internet. 4、Multiple access modes, card, card or PIN, card with PIN and multi?card/PIN. Support main card function, support package main card. Can communicate with mobile phone via Wifi/GPRS. 5、It can be connected to any keyboard reader with 4-digit, 8-digit (ASCII) or 10-digit virtual number to output. 2100 users can transmit user data. 1 x Dual?Relay Control Board 1 x Remote Control 1 x Screwdriver 1 x Installation Kit 2 x Master Card 1 x Instruction