MPPT Wind Charge Controller for 12/24V Systems, 800W Max Power

Wind Generator Controller 12/24V 800W MPPT Wind Charge Controller for Wind Turbine Systems Automatically charges the battery Features an integrated rectifier and brake circuit module for improved heat dissipation and enhanced reliability compared to traditional designs Fully sealed waterproof design with IP67 protection rating, allowing extended operation even when submerged in water Ensure wind turbine generator output voltage matches battery rated voltage before installation Connect wiring in the correct sequence: connect battery positive and negative terminals first, then connect the three-phase output from the wind turbine Follow instructions carefully when connecting battery and wind turbine to the controller; incorrect polarity or improper connections may cause system malfunction or permanent damage to the controller Wiring instructions: Connect battery positive (red) and negative (black) terminals to corresponding battery terminals on the controller Connect the three-phase output wires from the wind turbine to the three-phase input (green wires) on the controller Specifications: Maximum input AC voltage: AC35V Output voltage: 12V / 24V Battery charging cut-off voltage: 14.5V ± 0.3V / 29V ± 0.3V Maximum charging current: 15A (12V), 10A (24V) Wind generator speed limit voltage: 14.5V ± 0.3V / 29V ± 0.3V Protection level: IP67 Static power consumption: 0.008A Maximum load power: 800W Maximum allowable wind speed: 12 m/s Operating temperature range: -35°C to 65°C Input wiring: Three-wire system Control mode: Compatible with 12V and 24V systems Installation: Bolted mounting Avoid reversing positive and negative connections to prevent damage to the controller Application: Wind charge controller Color: Blue Material: Aluminum alloy Package includes: 1 x MPPT Wind Generator Controller Note: Package includes only the items listed above; other accessories are not included Note: Lighting effects and display settings may cause slight variations in color between the product image and actual item Measurement tolerance: ±1–3 cm