Auto detection of K-Line/CAN, with option to bypass and force preferred communication protocol. Temporary immobilizer bypass to enable bench flashing on ME7 systems. Boot mode support for ECUs with C167 and ST10 processors. EEPROM read/write functions available for select ECUs. TPROT level checking for MEDC17 without opening the ECU. System Requirements: - Install on Windows 7 operating system. - Proper driver installation required before launching software. Use only the driver provided on the included CD; do not use drivers from other MPPS versions. This module enables advanced functionality for a range of ECU types, including but not limited to M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delco, Trionic, and others. Supported Models: - 6JF: Full Read/Write microcontroller and EEPROM via K-line - 8DF: Full Read/Write microcontroller and EEPROM via K-line - 8F2: Full Read/Write microcontroller and EEPROM via K-line and CAN - 8F3: Full Read/Write microcontroller and EEPROM via K-line and CAN - 8GM: Full Read/Write microcontroller and EEPROM via CAN - 8GS: Full Read/Write microcontroller and EEPROM via CAN - 5SF3: Full Read/Write Flash and EEPROM via CAN - 5SF3: Full Read/Write EEPROM via K-Line - 5SF8: Full Read/Write Flash and EEPROM via K-line and CAN - 5SF9: Full Read/Write Flash and EEPROM via CAN Material: ABS plastic Color: Black Package Contents: 1 x MPPS V18.12.3.8 1 x Breakout Tricore Cable 1 x Connection Cable 1 x CD Note: The package includes only the items listed above. Other accessories shown are not included. Note: Lighting effects and display differences may cause slight variations in color representation. Measurement tolerance: +/- 1-3 cm.