500 Piece 3mm Tile Setting System Lay tiles easily, quickly and accurately with no overshoot. Suitable for small format tiles, especially large format tiles. The clip tears under the tile, this is called a forced tear edge, so nothing protrudes into the joint when grouting. For laying ceramic tiles, fine stone slabs, granite and marble slabs, for laying large and small flat and straight surfaces on floors or walls. Can also be used on uneven flooring. Simple and Precise Lay tiles easily, quickly and accurately without overshoot. Suitable for small format tiles, especially large format tiles. The clip tears under the tile, this is called a forced tear edge, so nothing protrudes into the joint when grouting. Easy and quick to use. Used by both DIYers and professional masons due to its simple and efficient operation. For laying ceramic tiles, fine stone slabs, granite slabs and marble slabs , for laying small and large surfaces on the floor or on the wall, flat and straight. Can also be used on uneven floors such as old buildings. This means you can compensate for unevenness. Great price with no effort. Not only are our bonding aids inexpensive, but they also reduce your workload as there is no need to add shims to seams. Versatile, clean and smooth. Tile leveling systems are suitable for small format tiles, especially large format tiles, because these large slabs are not easy to straighten. The pull tab tears under the tile, the so-called forced break edge, so that nothing protrudes into the joint when grouting. Developed in collaboration with artisans. Our tile inlay systems are designed in conjunction with tile setters and are continually improved and perfected. Optimization is smooth and we always make sure that all evolutions are compatible with older versions. The use XXL 1 - 1.5 - 2 - 3 - 4 - 4mm wide pull ring fittings for 13 - 22mm thick tiles, reusable wedges and adjustable dual axis mounting clips. /p> This is how it works step 1 Please insert the pull ring under the floor slab. Make sure there is no tile adhesive on the tab. step two Insert the spacer into the protruding part of the tab. Make sure that the wedge is not pushed in too much. Step 3 Now secure the wedges with special pliers and push them hard so that the two tiles are on the same level. Step 4 Once the tile adhesive dries, the pull tab will be pushed back with your foot at the breaking point.