Feature: 1. CORROSION RESISTANT: Made of high-quality aluminum material, corrosion resistant, no rust, with good strength 2. GOOD AIR TIGHTNESS: Pneumatic manifold air distribution block is easy to install, no air leakage, and offers reliable air tightness 3. WIDELY USED IN ENGINEERING APPLICATIONS: Commonly used in industrial automation, factories, auto repair, electronics, and electrical engineering projects 4. HIGH PRESSURE RESISTANCE: Working pressure range from 0 to 0.9 MPa, with a maximum pressure resistance of 1.0 MPa, ensuring durable performance under high pressure 5. COMPATIBLE WITH AIR SYSTEMS: Air coupler fast connector is designed for use with compressors, air pumps, and various pneumatic equipment, providing practical and efficient connectivity Specification: Item Type: Pneumatic Manifold Air Distribution Block Material: Aluminum Pressure Resistance: 1.0 MPa (10 kgf/cm²) Working Pressure: 0–0.9 MPa (0–0.92 kgf/cm²) Operating Temperature Range: 0–60°C Model: SY30-02-3F Total Length (approx.): 106 mm / 4.17 in Positions/Holes: 3 Position, 5 Hole Length x Width (approx.): 30 x 30 mm / 1.18 x 1.18 in Main Air Pipe: G1/2 (approx. 20 mm / 0.79 in) Branch: G1/4 (approx. 12 mm / 0.47 in) Branch Center Hole Diameter: Approx. 32 mm / 1.26 in Mounting Hole Diameter: Approx. 5.2 mm / 0.2 in Vertical Mounting Hole Center Spacing: Approx. 20.5 mm / 0.81 in Horizontal Mounting Hole Center Spacing: Approx. 32 mm / 1.26 in Model: SY30-02-4F Total Length (approx.): 138 mm / 5.43 in Positions/Holes: 4 Position, 6 Hole Branch Center Hole Diameter: Approx. 64 mm / 2.52 in Model: SY30-02-5F Total Length (approx.): 170 mm / 6.69 in Positions/Holes: 5 Position, 7 Hole Branch Center Hole Diameter: Approx. 96 mm / 3.78 in Package List: 1 x Pneumatic Manifold Air Distribution Block Note: 1. Avoid frequent plugging and unplugging of the air pipe during use, as this may reduce the service life of the connector and air pipe. 2. Ensure the air pipe is fully inserted to the bottom of the joint to prevent air leakage. 3. When disconnecting the air pipe, first confirm that there is no pressure in the line, press the end cap of the joint fully, and then remove the pipe.