PRO D2 is a passive DI box: It has 2 unbalanced input interfaces, which are 1/4 inch (6.35mm) interfaces, for connecting musical instruments or other unbalanced signal sources, such as electric guitars, electric basses, keyboards, etc.; and 2 balanced output interfaces, which are XLR interfaces, for connecting mixers, audio interfaces or other devices that require balanced signal input. The input and output are equipped with isolation transformers to isolate ground loop current infection, and also have a 1/4 inch Thru interface to send unprocessed signals to other devices, such as amplifiers on stage, for live monitoring. Frequency response: 20Hz - 20kHz, which can ensure the integrity of the audio signal and ensure that both high and low frequency signals can be transmitted well. Input and output impedance: The input impedance is 50kΩ, and the output impedance is 600Ω, which helps to reduce signal reflection and distortion and ensure effective signal transmission Attenuation (Pad): Used to reduce the level of the input signal to prevent signal overload. The attenuation values are 0dB, -20dB -40dB. Ground Lift: Used to disconnect the Pin1 transmission on the DI box XLR jack to prevent current from flowing along the shield between the DI and the microphone preamplifier, thereby disconnecting the ground loop and eliminating noise such as hum caused by grounding problems. Applications For acoustic guitars and bass guitars For stereo keyboards and drum machines Connect consumer audio products to professional audio equipment Eliminates "squeaks" and "hums" caused by ground loops Highlights Ultra-rugged design for extended life Plug and play for easy operation Completely passive design, no power required Colour:As Shown Material:Metal Tips: The product may be updated constantly ,Due T