Professional Water Flow Sensor Switch G1/4 Thread Plastic Flow Sensor fitting for Water Dispenser Water Purifier Durable

Features When the water flows in the preset- flow channel, it pushes the magnet- to displace. When it moves to the corresponding reed- tube, the reed- tube conducts after sensing the magnetic field. When there is no water flow, the magnet- to its position under the thrust of the spring, and the reed- tube is disconnected after the corresponding reed- tube cannot sense the magnetic field.br Thread G1/4-inch, startup- flow 300ml/min-, response time less than 1s.br Lightweight, reasonable size, stable performance, low water pressure start-, easy to install, safe to use.br Can be perfectly used for water dispenser, water purifier, water vending machine, etc.br High quality material, which is sturdy- and durable in use.br Specifications Material Plasticbr Applicable water quality turbidity less than 1 Fe-, C-o & Ni- less than 0.3Mg-/Lbr Applicable water pressure equal or less than 0.8mpabr Applicable water temperature 550℃br Ambient- humidity less than 85br Storage temperature -2050℃br Thread G1/4br Startup- flow 300ml/min-br Response time less than 1sbr Switch type Normally openbr Length of wire 50cmbr Cable- connection strength outlet end of the body Exert 20N-10s tensile force along the axis- of the terminal-br Apply 20N-10s pulling force along the vertical direction of the terminal- no at the connectionbr Hydrostatic pressure Open 1.05MPa for 5 minutes no leakage or br Voltage-resistance applied between live- part and non-live- partbr DC160V, 1min or DC200V, 1sbr No flicker or breakdownbr Maximum closing current 0.5Abr Maximum load current 1Abr On resistance 0.12Q-br Disconnect-resistance 10120br Power connection capacity 0.2PFbr Package Includes 1x Water Flow Switchbr note Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.br Due to the difference between different monitors, the picture may not reflect the actual color of the item.