Semi-Automatic/Manual Glue Dispenser Pneumatic Dispensing Controller Vacuum Back Suction Device Precise Drip 982 Paste Dropper Description Semi-automatic Glue Dispenser Machine Are you affected by the slow speed of traditional drip glue, which affects productivity? Are you often wasting a lot of glue material? Do you feel that the precision of glue dripping is low and difficult to control? Choose this semi-automatic glue dispenser machine, which can precisely control the dripping speed and improve the working efficiency, bringing you a more efficient and energy-saving working experience! Specification Color: Black Model: 982 Material: Metal Spitting Mode: Manual / Semi-automatic Minimum Drip Volume: 0.01ml Spitting Time Interval: 0.1-9.9s Automatic Timing(Can Be Set): 0.01-30s Repeat Accuracy: 0.5% Internal Voltage: 12-24DC Input Air Pressure: 2.5-7bar(35-100psi) Output Air Pressure: 0.1-5.5bar(1-78psi) Power Consumption: 20W Product Size:23*15*6cm/9.05*5.9*2.36in Package Size:20*26*14cm/10*9*12.5in Gross Weight: 2.1kg/4.63 lbs Plug Specification: American Standard 110V/ European Standard 220V Power Supply:110V AC, 60Hz /220V AC, 50Hz Package Included 1* Dispenser Main Unit 1* Manually Switch 1* Foot Switch 1* Air Tube 1* Connection Tube 1* Power Cord 1*Dispenser Stand 2* 30CC Liquid Barrels 6* Dispensing Needles 1* Chinese and English Manual Key Features Vacuum Back Suction: This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively prevent the glue from dripping during use to achieve a more accurate glue dripping, and ensure a clean and tidy working environment. Quick Start: This item adopts a high-quality electronic valve, which can instantly start the diaphragm valve and increase the working efficiency by more than 80%. Precise Drip: The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness. Semi-automatic Design: It can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position, to achieve a more efficient and higher-quality working method. Stable Voltage Change: Features a high-end all-copper coil transformer, which can stabilize the voltage change and increase the service life, and can be used in high-frequency and high-intensity work scenarios, improving operational safety while being efficient and energy-saving. High-precision Air Pressure Gauge: The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely to ensure that the air tube will not break. Solid and Durable: The product is made of metal, strong and stable, not easy to damage and corrosion, but also uses the fourth generation chip design circuit board, significantly improving stability. Anti-impregnation Design: It is equipped with high-quality electronic valves, with a certain anti-impregnation function, to better ensure operational safety and can also effectively extend the life of the semi-automatic glue dispenser machine. Details Anti-slip Feet: The bottom has anti-slip feet so that the product is placed more stable and does not easy to fall down and slip. Rounded Corners: The corners have been polished to become smooth and rounded, reducing the risk of you being accidentally bumped at work. Application It is suitable for most of the yellow glue, quick-drying glue, epoxy resin, etc. in the market, and is widely used in bonding various electronic components, machine production, instrumentation, jewelry, and other objects. Notes: 1.The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors. 2.If available, store all materials at a constant temperature (5) as directed to ensure that the concentration does not change significantly during use. 3.When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent. 4.Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation. 5.Automatic state work, accord