Automatic Component Type Detection • Automatic Pinout Detection • Special Feature Identification such as Protection Diodes and Resistor Shunts • Bipolar Transistors: Gain and Leakage Current Measurements, Silicon and Germanium Detection • Gate Threshold Measurement for Improvement Mode Sensors • Semiconductor Forward Voltage Measurement for Diodes, LEDs, and Transistor Base-Emitter Junctions • Automatic and Manual Shutdown. Product Basic Information: •• Primary Colors: Black •• Additional Colors: Blue •• Depth Unit: 20 mm •• Height Unit: 70 mm •• Width Unit: 103 cm •• Weight Unit: 98 G • Technical Data: •• Maximum Peak Test Current to S/C: 5.5 Ma •• Maximum Peak Test Voltage Across O/S: 5.1 V •• Diode Specifications: Test Current: 5.0 Ma Voltage Accuracy: -2% -20 Mv To +2% +20 Mv Vf for Lead Identification: 1.50 V - 4.00 V Short Circuit Threshold: 10 Ohm •• Scr/Triac Specifications: Gate Test Current: 4.5 Ma Load Test Current: 5.0 Ma •• Transistor Specifications: Gain Range (Hfe): 4 - 65,000 Gain Accuracy: ± 3% ± 5 Hfe Vceo Test Voltage: 2.0 V - 3.0 V Vbe Accuracy: -2% -20 Mv To +2% +20 Mv Vbe for Darlington (Shunted): 0.95 V - 1.80 V (0.75 V - 1.80 V) Base-Emitter Shunt Threshold: 50 Kohm - 70 Kohm Bjt Collector Test Current: 2.45 Ma - 2.55 Ma Bjt Acceptable Leakage: 0.7 Ma Mosfet: Gate Threshold Range: 0.1 V - 5.0 V Threshold Accuracy: -2% -20 mV to +2% +20 Mv Drainage Test Current: 2.45 Ma - 2.55 Ma Port Resistance: 8 kohm Depletion Drain Test Current: 4.5 Ma Jfet Drain-Source Test Current: 0.5 Ma - 5.5 Ma • Environmental Data: •• Operating Temperature Range: 0-50 °C • Power Supply: •• Batteries Included: No •• Number of Batteries: 1 •• Battery Voltage: 1.5 V •• Battery Composition: Alkaline •• Battery IEC Size: Aaa (LR03, R03, Fr03, Hr03, Kr03, Zr03 ,24A, 24D, 24Lf, Um4, Micro, Mn2400, Mx2400, Mv2400).