The Vehicle Loop Detector is designed to detect the presence and passage of vehicles. It features a reset switch that allows manual resetting during commissioning and testing, enabling the detector to re-tune the sensing loop for optimal vehicle detection. Selectable Time: This setting determines the duration the relay remains energized—either 1 second or 0.5 seconds. Relay Configuration: The relay can be set to activate upon vehicle detection or when a vehicle exits the loop. Sensitivity Boost: This function sets the detection sensitivity to maximum level, helping prevent missed detections of high-bed vehicles. Switch-Selectable Sensitivity: Four sensitivity levels are available via DIP switches, allowing flexible configuration based on site requirements. Switch-Selectable Frequency: Four frequency options help prevent interference between adjacent detection loops. Filter Option: Provides a time delay between vehicle detection and relay output activation, useful for ignoring small or fast-moving objects. Permanent Presence Mode: Maintains continuous detection signal when a vehicle remains parked over the loop for extended periods. Specifications: Supply Voltage: 220V AC Power Consumption: 4.5VA Output Relay Rating: 240V/5A Operating Temperature: -20°C to +65°C Storage Temperature: -40°C to +85°C Frequency Range: 20 kHz to 170 kHz Temperature Compensation: 50°C/h Reaction Time: 10ms Signal Holding Time: Unlimited or limited mode selectable Sensitivity Settings: Higher (0.02%), High (0.05%), Low (0.1%), Lower (0.5%) Loop Inductance: Total inductance (loop plus wiring) between 50μH and 1000μH; ideal range 100μH to 300μH Loop Wiring: Up to 200 meters, resistance less than 80 ohms, twisted at least 20 times per meter Relative Humidity: Less than 90%, non-condensing Weight: 283g Color: Black Material: Plastic and metal Package Contents: 1 x Vehicle Loop Detector Note: Colors may vary slightly due to lighting and display settings. Measurement tolerances may vary by +/- 1–3 cm.