RESUABLE and DURABLEThe tile leveling systems are reusable, it was quite easy to repair or remove with a special wrench to save your money. The reusable tile installation tool kit is made of PP which features extreme hardness to effectively avoid product deformation and breakage. IDEAL TILE LEVELING TOOLThe tile leveling system ensures flatness between tiles to avoid unevenness. They are wonderful tiling tools for laying floors and walls | Suitable for tile thickness from 3mm to 17mm, suitable for tile gap 2mm. BETTER COATING EFFECTThe new innovative tile leveling system allows both DIY and professional tile layers to increase tile laying efficiency and achieve a perfect finish without staining. FASTER & MORE EFFICIENT Improve tile installation speed and reduce installer fatigue/stress | Virtually lippage-free, drastically flat surface | Reduce the need for grinding and polishing | Prevent tiles from moving during curing. Reusable wedges. APPLICABLE BRICK GAP 2mm-6mm, Applicable slab thickness: 3mm---16mm Features: Tile Equalizer Leveler Floor Wall Tile Locator Clamp Plier Accessory Reusable Instructions: 1. Pull out the leveler to adjust the distance between the T-needle 2. Insert the T-shaped needle along the slot with a slot of 1.5mm or more, and then rotate it 180. 3. Adjust the cover clockwise with your hand or with a special wrench to make the two faces of the bricks at the same level. 4.Tray tight adjustment cover, the T-pin is glued to the bottom of the two bricks to complete the leveling Description: Material: high quality PP + stainless steel Size: see figure Applicable brick gap: 2mm-6mm Applicable tile thickness: 3mm---16mm Package: 1 * 50pcs/set Set 1 * Wrench Note: It is recommended to leave a gap of 1.5mm or more. It is recommended to dismantle the recycling within 6 hours after paving or cementing, and the recycling effect is better before the glue is completely dry.