OEM LCD Screen Digitizer Full Assembly with Frame Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with glass splinters. Tips 2: Simulated testing Screen replacement is a very fragile product. We strongly suggest testing before installation. Please perform simulated testing, which means disassembling the mobile phone, connecting the motherboard, LCD or screen, o cable, and new replacement, then powering on to complete the test. If the test is successful, proceed with installation. If there is no display, immediately. Do not force installation into the mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please ensure the LCD cable is not over-bent. Bending beyond 90 degrees may cause black display. About the product 1. LCD display and touch screen digitizer assembly with frame replacement part 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshed than ever 4. Complete fit and functionality 5. Each item has been tested and confirmed in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed