OEM LCD Screen for Nokia G22 with Digitizer Full Assembly Before Installation – Important Notes Tip 1: Test Before Installation When testing, do not remove any protective films or tags. Be mindful of static electricity. Always ground yourself using an ESD (electrostatic discharge) strap before beginning any repair to prevent damage to internal electronic components. Wear eye protection and handle the glass with care to avoid injury from sharp edges. Tip 2: Perform a Simulated Test Screen replacements are delicate. We strongly recommend testing before full installation. Partially disassemble the device, then connect the motherboard to the new LCD/screen assembly along with the o cable. Power on the phone and complete all functionality tests. If the screen works properly, proceed with full installation. If the display does not function, contact support immediately. Do not force installation if issues are present. No responsibility is assumed after the screen has been fully installed. Tip 3: Avoid Excessive Cable Bending Do not bend the LCD cable beyond 90 degrees. Over-bending may result in display failure, including black screen issues. Product Features 1. Complete LCD display and touch screen digitizer assembly replacement 2. Replaces broken or non-functional screens 3. Restores device appearance and performance 4. Designed for precise fit and full functionality 5. Each unit is inspected and confirmed in good condition prior to shipment 6. Professional installation is highly recommended. No responsibility is assumed after installation