Product weight: 0.992 lbs/450 g Packing size: 28*24.5*9.5cm Material‎:ABS Dyson cordless vacuum cleaner quick setup Step 1: Connecting the extension tube to the wand -1. Remove the extension tube and the desired wand (e.g. direct-drive floor brush, motorized mattress wand, etc.) from the box. -2. Insert one end of the extension tube into the handle socket on the top of the main unit and make sure that it is securely seated. -3. Depending on your cleaning needs, insert the wand of your choice directly into the other end of the extension tube, again making sure that the wand is tightly connected to the extension tube. again making sure that the wand is tightly attached to the extension tube and that there is no wobbling. Step 2: Switching modes and start-up preparation -1. On some models (e.g. V10 and V11), you can adjust the power mode according to the type of floor or cleaning needs, by selecting the appropriate gear with the slide switch on the main unit. -2. Make sure that the vacuum cleaner is switched off and then press the start button to activate the vacuum cleaner. CAUTION: - During installation, please do not force docking of the parts to avoid damaging the interface. - After installation, check that the filter is properly installed and cleaned before first use. - After use, please empty the dust canister in time and clean/replace the filter regularly to maintain optimal performance. - Vacuum cleaner attachments are varied, so please choose the right head for the actual cleaning task. Now your Dyson cordless vacuum cleaner is ready for efficient and convenient cleaning right away!