1. 2.4GHz WiFi Bridge/Repeater: This industrial-grade 2.4GHz Mini WiFi Bridge/Repeater enables seamless conversion between WiFi and wired connections (Ethernet to WiFi or WiFi to Ethernet). Featuring a WiFi rate of 300Mbps, it supports WiFi standards 802.11b/g/n. 2. Versatile Functionality: The device serves multiple purposes: as a WiFi repeater, a WiFi bridge (offering IP or MAC layer transparent transmission), and a WiFi access point (AP) hotspot. It effectively facilitates WiFi smart bridging, enabling easy switching between wired and wireless connections. 3. Point-to-Point Transmission: Achieve reliable transmission over distances of up to 100 meters without obstacles for small data. For video transmission, the effective range is under 50 meters. Equipped with two 1.5dBi internal antennas, this device is ideal for monitoring systems, electronic scales, DVRs, IP cameras, medical equipment, IoT devices, and more. 4. Power and Connectivity: Supports a wide voltage range of DC 5V-15V (typical 5V/1A, ripple < 100mV) with an average power consumption of less than 2.5W. Comes with a 30cm power cable, one male DC port, one male USB port, one female DC port for parallel connection, and one adaptive 10/100Mbps Ethernet port. 5. Transparent Data Transmission: Supports both IP layer and MAC layer transparent transmission modes. The default IP layer configuration meets most bridging applications, while the MAC layer mode allows for the transmission of all data above the MAC layer, including IP data (compatible with Cisco AP and Hikvision systems). 6. User Note: When connected to an external network, the bridge's IP address will change. For accessing the configuration interface, use the dedicated domain name: .cfg. Alternatively, find the device's current IP by entering "ping .cfg" in the Windows Command Prompt to log into the configuration page.