Description:Real-time relay timing and clock synchronization time control delay 24H timing for 5 periods;Product Highlights:Wide voltage supply 5.0V ~ 60V;A mode can be set for multiple periods, can reach 5 periods;With a buzzer alarm function.Mode introduction:OPE: relay closing time point, CLE: relay off time;Period: PE-1 ~ PE-5 5 periods (OPE to CLE is one period)Shield function:P-1: The relay closes or outputs pulses every day to the OPE time point, and the relays shuts down or outputs pulses every day to the CLE time point.P-2: set the day, to the OPE time point when the relay is closed or output pulse, to the CLE time point when the relay disconnect / or output pulseP-3: the date of the month, to the OPE time point when the relay is closed or output pulse, to the CLE time point when the relay is turned off or output pulseP-4: from date 1 to date 2, start every day at the OPE time point, end at the CLE time point, relay action or output pulse;P-5: As with P-4, only month cannot be set;In time to enter the interface, press the button for a while:Step 1: Select the period: PE-1 ~ PE-5 To select UP and DOWN;Step 2: Press the SET key to enter the mode: p-1 ~ P-5 (Set this period to the corresponding mode) by pressing the UP and DOWN keys. ("----" means block this period)Note: Any period can be repeated from the "----", p-1 ~ P-5 one of the optional; for example, you can let five periods work simultaneously in P-1 mode, or let period 1 work in P-1 mode, period 2 work in P-2 mode and so on.Step 3: After the mode selection is finished, press the SET key to enter the time period setting interface, set the interface in the period, press the SET key to enter the parameter, "OPE" start time point, "CLE" end point , "dAE" date information;Step 4: After setting the parameters to the settings, press the SET button for 2 seconds to release, automatically check whether the parameter settings are legal, legal to set the parameters, back to the time to enter the interface; if the parameter is wrong, "ERR" reminder (for example, Stop time or Date start time or date), return to the parameter setting interfaceAdditional functions: Each "period" can be set individuallyIn the specific parameter setting interface (after the second step), press the STOP button to enter the output mode:OUT1: Start time point turns off the relay, time is off the relayOUT2: Outputs 1S pulse to start or timeIn the specific parameter setting interface (after the second step), press the STOP button for a while to enter the ringing mode:BLL0: Disable ringBLL1: Ring standsNote: When the rings on a button around the ringColour:BlackMaterial:plasticSize:82x49mmPackage Contents:1 * Automation RelayOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.