Waterproof Ultra Distance Sensor Module for Measurement Applications

The basic working principle 1. Use the IO port TRIG to trigger a high-level signal of at least 10μs 2. The module automatically sends eight 40kHz pulses and detects if a signal is returned 3. When a signal is returned, a high-level pulse is output through the IO port. The duration of the high level corresponds to the time from transmission to reception of the ultrasonic wave. Distance = (high level time × speed of sound (340m/s)) / 2 4. This module uses a simple method: apply a 10μs high-level signal to the control pin, then wait for the echo response on the receiving pin. When the output goes high and then returns low, the time can be measured and used to calculate distance. Repeating this cycle continuously enables continuous distance measurement Electrical properties 1. Model: JSN-SR04T 2. Operating voltage: DC 5V 3. Standby current: 5mA 4. Working current: 30mA 5. Ultrasonic frequency: 40kHz 6. Maximum detection distance: 4.5m 7. Minimum detection distance: 25cm 8. Pin configuration: - VCC: Positive power supply - Trig: Trigger input - RX: Receiver output - TX: Transmitter output - GND: Ground 9. Resolution: approximately 0.5cm 10. Beam angle: less than 50 degrees 11. Operating temperature range: -10°C to +70°C 12. Storage temperature range: -20°C to +80°C Product Features 1. Compact size, easy to integrate 2. Low operating voltage and low power consumption 3. High measurement accuracy 4. Strong anti-interference capability 5. Includes enclosed waterproof probe, suitable for wet or harsh environments Applications 1. Distance measurement 2. Obstacle detection and avoidance systems 3. Object presence detection 4. Traffic monitoring systems 5. Security and industrial control systems 6. Robotics and research projects Color: Random color may vary by batch Material: PCB Version: Old version Note: Product appearance and color may vary slightly between batches, but functionality remains unchanged Package Contents: 1 x Ultrasonic Module Note: Light reflection and display differences may cause slight variations in color representation. Measurement error tolerance: ±1–3cm