Wireless Bluetooth Handle Left and Right Gamepad Joystick Controller with NFC for Switch

1、Support Bluetooth wireless connection with for Switch host platform, Bluetooth 5.0 protocol. 2、The design has Turbo setting function, can change the Turbo rate, has a screenshot button, six‑axis gravity sensing function. 3、With dual vibrator vibration function, vibration feedback provides engrossing game experience. 4、Support NFC sensing. Support host wake‑up function and codes key connection. 5、With charging indicator. The battery capacity of the left and right handles is 160mAh, and the standby time is long. Item Type: Gamepad Material: ABS Color: As shown in the picture Bluetooth: 5.0 protocol Working Temperature: -40℃-80℃ Working Voltage: 3.4V Battery Voltage: 3.5-4.2V Sleep Current: 1uA-2uA Working Current: 30-50mA Handle Battery Capacity: L: 160mAh R: 160mAh Mode and Pairing Connection Description: 1. Switch wireless connection mode: (1) Before using the wireless connection, please make sure that the console’s system input: "Controller->'Change Crip / Order and is in the pairing state (2) Long press the controller codes key for about 3 seconds to enter the Bluetooth search mode, the LED light will flash from "1-4-1" in the form of a selection box, and the corresponding channel indicator will always be on after the connection is successful. 2. Guide instructions and reverse connection mode: (1) Short press for 1 second to wake up the controller in sleep mode: short press the Bluetooth codes matching key to turn off the controller. (2) Press any key (except Turbo) to wake up the controller: the controller will automatically reversely connect to the previously paired console: if the reverse connection is unsuccessful within 8 seconds, it will enter the automatic sleep state. (3) When the console and controller are in sleep state, press the HOME button to wake up the console: If it is not successful, you can press the HOME button again to wake up the console and controller. 2. NFC function: Because the NFC sensing area is located on the correct controller3D. You should make the NFC card close to the 3D cover of the right controller. The reading time is 5-8s. 3. Charging indication and charging characteristics: When the controller is charging: the charging LED is on, and the LED indicator is off when it is fully charged. 4. Automatic sleep: Connection mode with the host: Turn off or turn off the screen of the host, so that the controller automatically disconnects and enters the sleep state Bluetooth connection mode: After short pressing the Bluetooth codes key, Bluetooth will disconnect and enter sleep mode. If you don't press any key of the controller within 5 minutes, it will automatically enter the sleep state (including the gravity sensor not moving). 2 x Gamepad 2 x Lanyard 1 x Charging Cable 1 x Instruction Manual